|
| HOME > PRODUCTS > Digital Satellite Meter 1600 |
| |
¢Â DIGITAL SATELLITE METER [1600]
|
| |
¡á FEATURES
- Simple/Fast/Easy Operation : If needed, the user can change satellite name, local frequency, TP frequency, TP number(or channel name) directly in LCD screen.
- Signal level and actual SNR are displayed toge ther in one screen and the measurement unit can be changed to dB or %.
- SR/FEC/BER are displayed in one screen.
Max. 10 satellites or 300 transponders, signal polarity, TP number, channel name[provider], SR,FEC are preprogrammed.
- Peak signal level detection with audible tone for aligning dish.
- Comuter interface
: Serial Port[COM1, 2, 3 or 4] for downloading a satellite file list .
- User can download/edit a satellite file list by using
Hyper-Terminal program.
- DVB and DSS compatible
- LCD Backlight On/Off & Contrast Adjustment
- DiSEqC switch commands are available.
- CE/FCC approved.
|
|
|
| |
¢Â MAIN FUNCTIONS |
| |
¡á ANALOG SAT
- Frequency Range : 950 ~ 2,150MHz
- Measurement Units : dB(dBuV) or %
- Input Impedance : 75¥Ø (F-type connector)
- Frequency Resolution : 0.1MHz
- Level Measurement Range
: 20dBuV(-40dBmV)~105dBuV(+45dBmV)
- Level Measurement Resolution : 0.1dB
¡á DIGITAL SAT (DVB-S & DSS)
- Level Measurement Range
: 20dBuV(-40dBmV)~105dBuV(+45dBmV)
- Lock Range
: 30dBuV(-30dBmV)~105dBuV(+45dBmV)
- QPSK Signal Parameters
1) Symbol Rate : 1 ~ 45Msps
2) Code Rate : 1/2, 2/3, 3/4, 5/6, 6/7, 7/8
3) BER : 2 X 10E-2 ~ 2 x 10E-6
4) SNR : 3 ~ 15dB
5) Spectrum Inversion : Auto
6) Auto Scanning Mode
: Blind Symbol Rate,
Code Rate Acquisition
¡á OTHERS
- LNB Feed
-Output Voltage : 13V, 18V - ¡¾1V
-LNB Supply Current : Max. 450mA
-LNB Short Circuit Protection : Max. 500mA
-Signal Output : 22KHz, DiSEqC
- Beep Sound
- Auto Time-Out
- LCD Backlight On/Off
- Satellite Memory Function
1) Max. 10 Satellites
2) Max. 70 Transponders per Satellite
3) Max. 300 Transponders
|
- RS232C Standard Serial Interface Port
1) Max.new 10 Satellites can be upgraded using Hyper-Terminal Program via PC/Internet
2) No need a special software
- Power Supply
1) Built-in Ni-MH rechargeable batteries
: 7.2V(1.2V x 6), 2,400mAH
2) Battery Charge Indication
3) Battery run time with full charge
- Full charge : over 8hours.
- From 1.5 to 2.5hours
(Depending on LNB consumption & Backlight display)
- Up to max. 5hours(without LNB feed)
- Main Adapter : 220V/60Hz, 12V 500mA
(changeable according to country)
- Operating Circumstances
-Useable Temperature : 5 ~ 50¡É
- Mechanical Features
-Dimension
: 143§®(W) X 136§®(D) X 54§®(H)
-Weight : 550g(including batteries)
-Character LCD with Backlight : 12 X 2 lines
-Casing Structure : shock-proof plastic(ABS)
¡á STANDARD ACCESSORIES
- Ni-MH Rechargeable Batteries
: 7.2V 2,400mAH
- "F"type connector(1ea.)
- Carrying Bag/Shoulder Strap
- DC Adapter
- User's Manual
- RS-232C cable
¡á OPTIONAL ACCESSORIES
- Car Cigarette Lighter Adapter Cable
- Cloning Cable
|
|
| |
¢Â SPECTRUM |
| |
 |
 |
 |
| |
Battery Charge Indication |
Longitude/Satellite Name |
Signal Level[dB or %] Signal Quality[SNR, dB or %] |
| |
 |
 |
 |
| |
SR, FEC, BER |
Signal Polarity/Signal Band
LNB Local Frequency |
TP No[or Channel/Provider Name]
Transponder Frequency |
| |
 |
 |
|
|
DiSEqC Switch Command |
SYSTEM Setup RS-232 Setup |
|
| ¡ãTOP |
|
|
|