DIGITAL SATELLITE METER 1650S

1. 1650S satellite meter?

The optimal satellite signal meter to test and measure both analog/digital signals(DVB-S, DSS). Especially, these models give users the capacity to measure 'C/N' very easily and correctly, which are very important measurement factors for the satellite broadcasting signal.

  • 1650S Frequency range : 950MHz ~ 2150MHz

 1650s_100.jpg

2. MAIN FEATURES

  • Spectrum analysis (with Rotator Control)
  • Identifies Max. 50 Satellites Automatically
  • Pre-BER, SNR
  • Level Measurement for Analog/Digital Sat.
  • Peak Level Detection with Beep Sound
  • Single/Dual Satellite(s) Measurement Mode
  • TP List Scan/Blind Scan
  • Single/Universal LNB Setups
  • Cloning Mode
  • DiSEqC 1.0/1.1/2.0

3. SPECIFICATIONS

■ ANALOG SAT

  •   Frequency Range : 950 ~ 2150MHz
  •   Measurement Units : dB (dBuV,dBmV,dBm) or %
  •   Input Impedance : 75 Ω (F-type connector)
  •   Frequency Resolution : 0.1MHz
  •   Level Measurement Range : 20dBuV(-40dBmV) ~ 105dBuV(+45dBmV)
  •   Level Measurement Resolution : 0.1dB
  •   Level Measurement Accuracy : ±2.0dB (5~50℃)

■ DIGITAL SAT(DVB-S & DSS)

  • Level Measurement Range : 20dBuV(-40dBmV)~105dBuV(+45dBmV)
  • Lock Range : 30dBuV(-30dBmV)~105dBuV(+45dBmV)
  • QPSK Signal Parameters→Symbol Rate : 1 ~ 45Msps→Code Rate : 1/2, 2/3, 3/4, 5/6, 6/7, 7/8
  • BER : 2x10E-2 ~ 2x10E-6(~8)
  • SNR : 3 ~ 15dB
  • Spectrum Inversion : Auto
  • Auto Scanning Mode : Blind Symbol Rate, Code Rate Acquisition

■ SPECTRUM ANALYZER

  • Level Measurement Range : 30dBuV(-30dBmV)~105dBuV(+45dBmV)
  • Span : 20M, 240M, 600M, FULL
  • Level display for the selected frequency by the user
  • DiSEqC positioner control with spectrum analyzer

■ LNB Feed

  • Output Voltage : 13V, 15V, 18V - ±1V
  • LNB Supply Current : Max. 450mA
  • LNB Short Circuit Protection : Max. 500 mA
  • Signal Output : 22KHz, DiSEqC

■ Peak Level Detection with Beep Sound

■ Dual Satellites Measurement Mode with Auto LNB Control

■ Auto Time-Out

■ LCD Backlight Contrast Control

■ Satellite Memory Function

  • Max. 50 Satellites
  • Max. 70 Transponders per Satellite
  • Max. 1500 Transponders

■ RS232C Standard Serial Interface Port

  • Max.50 Satellite can be upgraded using HyperTerminal Program via PC/Internet
  • No need a special software

■ Power Supply

  • Built-in Ni-MH rechargeable batteries : 7.2V/2400mAH (1.2V x 6)
  • Battery Charge Indication
  • Battery continuous run time with full charge→Full charge : over 8hours→From 1.5 to 2.5hours (Depending on LNB consumption & Backlight display)→Up to max. 5hours(without LNB feed)
  • Main Adapter : 220V:60Hz, 12V/500mA (changeable according to country)

■ Operating Circumstances

  • Useable Temperature : 5 ~ 50℃

■ Mechanica Features

  • Dimension : 94mm(W)x47mm(D)x190mm(H)
  • Weight : 650g(including batteries)
  • LCD Graphic Display with Backlight : 128 x 64 dot matrix
  • Casing Structure : shock-proof plastic(ABS)

■ STANDARD ACCESSORIES

  • Mi-MH Rechargeable Batteries
  • F-type connector(1ea.)
  • Carrying Bag/Shoulder Strap
  • DC Adapter
  • User's Manual
  • RS232C Interface Cable

■ OPTIONAL ACCESSORIES

  • Car Cigarette Lighter Adapter Cable
  • Coaxial Cable

[Note] Specification to be changed without a prior notice to customers